I'm looking for the 'Bi-Metal' Bronze Bushings for the Angle Cylinders for the 6-Way Blade on a 1976 450C-6405 'dozer'.
The ones I've come across 'hither and thither' on the net listed for this model appear incorrect! They are pictured as thick walled solid steel types.
Mine are 1-1/2" ID x 1-5/8" OD. 1/34" long and 1/3/8" long (1/16" wall thickness) .... Bi-Metal, Bronze lined with Steel shell with a 'butterfly' joint - dimpled ID to hold grease.
I cannot find a supplier for these and web searches bring up nigh-on every manufacturing outfit in China looking for quantity business.
Anyone know where to get these? I know they're not unique to construction equipment!
There was a thread I saw a few days back here discussing Pins and Bushings, which frustratingly I cannot find now. Knash! A commenter weighed-in about steel types for the pins which was most interesting. Mentioned 4140 steel, 1045, 1018 and 'Stress-proof' 1144. Another guy pictured a bushing "just like I was after" so I'm hoping this thread may evolve to include the prior commenters.
Hat tip to the steel pin guy tho ..... I just ordered a batch of 3 x 7-1/2' long 1-1/2" diameter 1045 'end cuts' from ebay for $20. I'm going to cut to length and drill the retainer pin-holes myself.
450C 6405 (6Way Blade) Pins-n-Bushings
Re: 450C 6405 (6Way Blade) Pins-n-Bushings
John deere is my go to place for that stuff check with Lavoy the owner of this site he sells parts
JIM
JIM
Re: 450C 6405 (6Way Blade) Pins-n-Bushings
Deere is best bet for those.
Lavoy
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com
Owner and moderator www.jdcrawlers.com
Who is online
Users browsing this forum: No registered users and 99 guests