Track master pin

Post support questions about your JD350 and newer crawler here
Post Reply
User avatar
The Jug
420 crawler
420 crawler
Posts: 45
Joined: Wed Jun 16, 2021 2:12 pm
Location: Boston Ma

Track master pin

Post by The Jug » Sat Jun 11, 2022 8:13 am

Are most track pins generic? not as far as clip in type or press in type but as far as size or are they particular to each brand make of track? Watt i have is a press in type and is pretty bad off . Watts the best way to find a replacement ? Watt should i look for and were ? Maybe watt i am trying to ask is there a good web cite that carry's parts ? I searched through the post i didn't find anything pertaining to this . Not saying i couldn't be looking in the right spot .

i have JD 350 1968

User avatar
Lavoy
Site Admin
Site Admin
Posts: 10937
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:

Re: Track master pin

Post by Lavoy » Sat Jun 11, 2022 9:09 am

No such thing as a generic master pin, they are model and brand specific. I normally stock 350 master pins, there are headed master pins and drive type, would need to know which you have.
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com

User avatar
The Jug
420 crawler
420 crawler
Posts: 45
Joined: Wed Jun 16, 2021 2:12 pm
Location: Boston Ma

Re: Track master pin

Post by The Jug » Sat Jun 11, 2022 2:05 pm

One could only hope! Ill be in touch thanks !

Post Reply

Who is online

Users browsing this forum: No registered users and 53 guests