DEERE PARTS SPECS

Post support questions about your JD350 and newer crawler here
Post Reply
original possum
1010 crawler
1010 crawler
Posts: 258
Joined: Wed Sep 11, 2013 3:34 pm
Location: Shiner, texas

DEERE PARTS SPECS

Post by original possum » Sun Feb 05, 2023 3:11 pm

Now and then I see where someone has access to Deere parts specs or drawings. I need the drawing for a T37440 front clutch spider to recover one with a spun-out bearing. I have been unable to find a replacement and think a good machinist can bore out and re-line the bearing pocket if I can find the specs. I anyone has access to the drawings or specs or has a good one to measure please let me know.
Early 40C w/Yakima toolbar and homebuilt ripper: 350 w/6-way

Jim B
350 crawler
350 crawler
Posts: 2080
Joined: Sun Nov 05, 2017 11:36 am
Location: western Maine

Re: DEERE PARTS SPECS

Post by Jim B » Sun Feb 05, 2023 3:47 pm

If you know/have a new bearing the machinist may be able to use the bearing info to restore the pocket, it goes into.

original possum
1010 crawler
1010 crawler
Posts: 258
Joined: Wed Sep 11, 2013 3:34 pm
Location: Shiner, texas

Re: DEERE PARTS SPECS

Post by original possum » Sun Feb 05, 2023 6:32 pm

I agree he could get the diameter but the shoulder that sets the depth is also worn down and he will need to know how deep the bearing goes.
Early 40C w/Yakima toolbar and homebuilt ripper: 350 w/6-way

User avatar
Lavoy
Site Admin
Site Admin
Posts: 10937
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:

Re: DEERE PARTS SPECS

Post by Lavoy » Sun Feb 05, 2023 8:21 pm

Highly unlikely that information exists outside of Deere.
Lavoy
Parts and restoration for antique and late model John Deere crawlers.
Owner and moderator www.jdcrawlers.com

Post Reply

Who is online

Users browsing this forum: Google [Bot] and 57 guests