450 and 550 compatibility?
450 and 550 compatibility?
Hi, I have a 550 dozer with the 2 way up down blade that has the manual pin adjustments for 4 way with the framework outside the tracks. My question: Is it possible to remove this set up and install the 6-way blade with c-framework inside the track as well as all the necessary hydraulics fairly easy? If so will the existing pump drive the 6-way properly? And lastly is a 450 6-way the same one that's used on a 550? Any insight is greatly appreciated. Thanks
Re: 450 and 550 compatibility?
A quick review of the Deere parts online list the same dozers for the two machines. 6405, 6410, and 6415. I think the 6405 is the inside mount 6 way.
To see how comparable the 450 and the 550 dozers are you can take time and sift through the parts manuals compare the two.
https://partscatalog.deere.com/jdrc/nav ... VJUE1FTlRd
https://partscatalog.deere.com/jdrc/nav ... 0hBUFRFUl0
Hope this helps, Bruce
To see how comparable the 450 and the 550 dozers are you can take time and sift through the parts manuals compare the two.
https://partscatalog.deere.com/jdrc/nav ... VJUE1FTlRd
https://partscatalog.deere.com/jdrc/nav ... 0hBUFRFUl0
Hope this helps, Bruce
Who is online
Users browsing this forum: No registered users and 70 guests