JD 350 Straight - New to Me - Now What?

[bulletpruf]

Supposed to be delivered tomorrow or Friday. It's a 350 Straight, 6 way blade, S/N appears to be 058355T, so that's a 1967 model, correct? Anyway, it runs, steers, and operates, but needs plenty of TLC. Once I've gone through it, I'll use it on my buddy's ranch, on the deer lease, etc.

First things first, I need the full complement of manuals - operator's manual, parts catalog, and service manual, right? I found the sticky with manuals, but I'm kind of confused as to what I need.

Is there an operator's manual for earlier than OM T27996, which appears to be S/N 60524 and up?

I need the SM 2063, right?

And the PC 921 for the crawler?

And the PC 916 for the 6305 6-way blade?

Am I missing anything?

Thanks,

Scott

[LeonardL]

Scott, Not sure how your post went unanswered. Sorry about that. You should be able to go to the JD Parts page and order what ever manual you need. (https://partscatalog.deere.com/jdrc/ ) You will need to be serial number specific and they should be able to fix you right up. Either in electronic or print paper versions.

[bulletpruf]

Thanks, I found everything on eBay. I should be good for now.

Scott

[bulletpruf]

Any recommendations on a manufacturer and where to buy track shoes? It has loader shoes on it now and I'd like to swap to single grouser dozer shoes.

Thanks

[Jim B]

Contact Lavoy, he sells parts as well as providing this site.

[bulletpruf]

Ok, I sent him a message.

Thanks