Hydrolic Hose

[jboettcher]

I busted a hydrolic hose on my 555A crawler loader. Of course it had to be one which looks impossible to get too. If you sitting in the operators seat it's to your left at knee high behind a cover plate and numerous steel lines. I have removed the main pin for the large ram but how in the heck does one go about getting a wrench on both ends to get the old hose off and a new one on. Of course it's (bucket) is all the way down on the ground. Thank you


Myassitis from Mo.

[digitup]

Yes I have been in that position a time or two.I am sometimes lucky enough to use an other machine on the same site to lift the loader .If you have anyone in that area with a machine it would probably be a real help .Digitup.