350b update

[deli50]

final drive taken apart, fiber plates are soaked, (good call guys), found the problem, which was an oil seal (egg shaped) looks like it was pounded in with a hammer, gonna replace the seal, both inner & outter bearings, new fibers. Where would be the best place to order parts?

[sbogusta]

Also get this bushing. They tend to bend up easy when you try to put the final in. The john deere parts catalog is invaluable when you need parts diagrams.

.http://jdpc.deere.com/jdpc/servlet/com. ... ervlet_Alt

[Lavoy]

I have clutch discs on hand, might have the bearings.
Lavoy

[deli50]

Lavoy, how do I get ahold of you?, also need special tool