JD 350 precleaner CFM

Post support questions about your JD350 and newer crawler here
Post Reply
Bruski
40C crawler
40C crawler
Posts: 13
Joined: Thu Aug 09, 2007 3:24 pm

JD 350 precleaner CFM

Post by Bruski » Fri Aug 10, 2007 12:52 pm

Hi all,
I have a JD 350 with the 3 cyl diesel. The precleaner is missing. Does anyone know what CFM the engine draws? What is the engine model? Also can the engine be damaged by running it for a couple of minutes at a time on ether? I want to load it on a trailer, however it is not running (sitting for 2 years) but will start and run if I put ether in the intake. Thanks for any insight.
Bruski
Top
digitup
1010 crawler
1010 crawler
Posts: 393
Joined: Fri Dec 16, 2005 5:43 pm
Location: Ontario

Post by digitup » Fri Aug 10, 2007 5:46 pm

go to a tractor wrecker and get a proper one .It is the last thing that they would sell and the first piece they throw in the scrap.Digitup.
Top
User avatar
hunter41mag
440 crawler
440 crawler
Posts: 126
Joined: Tue Apr 12, 2005 7:11 am
Location: Eastern Pennsylvania (NE of Allentown)

Post by hunter41mag » Mon Aug 13, 2007 10:18 am

Bruski,

Ether will put alot of excess pressure on pistons and rings that can possibly break them. I suggest winching or pushing it onto trailer.
It may save you some costly repairs.
Don
Eastern PA
440IC (1960)
Top
Post Reply

Return to “Late model JD crawler technical support”

Who is online

Users browsing this forum: No registered users and 58 guests