555 low transmision preasure

[tizfatboy]

think i have bad seal going to tear it down. anyone have an idea to the cost to rebuild torconverter or where i could find a rebuilt.

[digitup2]

I never did much with the converter but I did have to replace the seal when I did a power shift rebuild on the old 550 .I know the transmission seal surfice was worn to a grove and I found a kit that a steel sleave fit tight over the converter output tube and a over sized seal were installed .I got that over the dealers counter but I dont know if it came from Deere them selves or else where.That dozer did another 7000 hours after that so the seal did work . When I sold that dozer the converter was just starting to go .Digitup.