Post support questions about your JD350 and newer crawler here
-
hugo
- 420 crawler
- Posts: 32
- Joined: Tue Oct 17, 2006 2:19 pm
- Location: holland (europe)
Post
by hugo » Thu Nov 13, 2008 4:40 pm
hi,
i am having problems with my rollers. I just want to put new grease in it.
I heard that they usually use button head fittings.
Now, how do i get them out? I like te repleace them for new ones. is there a special tool or way to do this?
All i see is a rusty and overpainted square hole.
its a 1965 jd 350 bulldozer. 5 roller
thanks
jd 350 mannheim build
-
Lavoy
- Site Admin
- Posts: 10949
- Joined: Sun Apr 03, 2005 8:32 pm
- Location: North Dakota
-
Contact:
Post
by Lavoy » Fri Nov 14, 2008 12:45 am
Those are sealed rollers, just take the plug out and add oil until it runs out.
Lavoy
-
hugo
- 420 crawler
- Posts: 32
- Joined: Tue Oct 17, 2006 2:19 pm
- Location: holland (europe)
Post
by hugo » Mon Mar 23, 2009 2:25 pm
Hi,
Because 3 rollers on te left side are leaking i have decided to put in grease.
I have 5 rollers done. One oil plug didnt came loose so i drilled and taped thread into it.
For the other 4, i have found some nice grease fittings. i hope it works.
hugo
jd 350 mannheim build
Who is online
Users browsing this forum: No registered users and 137 guests