I am trying to remove the pins that attach the hydr.cyclinder to the loader bucket.
I removed the countersunk bolt and matching washer that goes through the hydr. cyclinder and the link (arm) that goes to the top of the bucket but the side of the pin with the grease fitting looks to be welded. both side are the same and are painted over. Is this someones rig job or is there something i am missing?
THANK YOU AHEAD OF TIME!!!
350 loader bucket pins
350 loader bucket pins
thanks Paul
350 track loader, 350 dozer
350 track loader, 350 dozer
Thanks Ken, I am refuring to the tilt clylinder, I will look when i get home, I have ALOT of play in the tilt cylinders, I think i will have to machine some bushings to tighten things up. its hard to see with 30 years of hardened grease under the new grease HA HA
thanks Paul
350 track loader, 350 dozer
350 track loader, 350 dozer
Who is online
Users browsing this forum: No registered users and 155 guests