Post support questions about your JD350 and newer crawler here
-
Mulerider
- 40C crawler
- Posts: 10
- Joined: Fri May 23, 2008 9:11 am
- Location: Snook TX
Post
by Mulerider » Tue Dec 29, 2009 9:47 am
Any tips or shortcuts in determining which cylinder is not firing on a 450B?
The injector pump was rebuilt about 20hrs ago, and the machine had been running great.
Thanks,
Greg
-
KenP
- 350 crawler
- Posts: 824
- Joined: Tue Aug 26, 2008 2:05 pm
Post
by KenP » Tue Dec 29, 2009 1:46 pm
deleted
Last edited by
KenP on Sun May 26, 2013 3:25 pm, edited 1 time in total.
No longer posting on JDCrawlers
-
Garry
- MC crawler
- Posts: 7
- Joined: Fri May 29, 2009 7:34 pm
- Location: Finger Lakes NY
Post
by Garry » Thu Dec 31, 2009 3:43 pm
while it's running feel each injector, do so before it gets real hot, the cold one is your bad cylinder. garry
-
Lavoy
- Site Admin
- Posts: 10951
- Joined: Sun Apr 03, 2005 8:32 pm
- Location: North Dakota
-
Contact:
Post
by Lavoy » Thu Dec 31, 2009 9:29 pm
Crack the injector line while running. The one that has no effect on how it runs is the culprit.
Lavoy
-
Mulerider
- 40C crawler
- Posts: 10
- Joined: Fri May 23, 2008 9:11 am
- Location: Snook TX
Post
by Mulerider » Sun Jan 03, 2010 1:03 pm
Outstanding advice, many thanks.
...now that hunting season is about over, all I have to stall me is the weather.
And still way too wet to do much dozing.
Greg
Who is online
Users browsing this forum: No registered users and 113 guests