JDcrawlers Messageboard

ky crawler · Post by **ky crawler** » Tue Jul 20, 2010 9:26 pm

Hi, new to the site and new to owning a crawler,I dove into this project with no idea what I was getting into I hope that can get a few answers to a few questions. I just did a complete overhaul on the motor and reworked all the wiring. Now i get to find out what else the dozer needs, I want to change the oil in the transmission but I don't know what oil to put in it? I also need to find out what I have, if its a 350,350c or a 350b? It has a diesel motor, 6 way blade. the transmission is manual shift four speed with revers. Also can i get the linkage for my 6-way blade on my dozer.

Thanks guys
Ky Crawler

KenP · Post by **KenP** » Wed Jul 21, 2010 4:16 am

deleted

ky crawler · Post by **ky crawler** » Wed Jul 21, 2010 10:56 am

Thanks, looks like I have 1968 straight 350, where would be a good place to get a service manual and does anyone know the part# for the manual?

Tigerhaze · Post by **Tigerhaze** » Wed Jul 21, 2010 11:15 am

You can get a service manual or other manuals directly from Deere, either hardcopy or CD. Here is the service manual (SM2063).

http://www.johndeeretechinfo.com/index. ... t_id=40946&

You can also get them from Ebay and a variety of other tractor sites.

CatD8RII · Post by **CatD8RII** » Sat Jul 24, 2010 11:54 am

Just an FYI the C Models use type 303 everywhere except the engine. Some had reverse gear in the transmission as an option. I think it was standard on the 350s and 350Bs.

350

350

Who is online