Post support questions about your JD350 and newer crawler here
-
JD-thomas
- 430 crawler
- Posts: 65
- Joined: Wed Dec 09, 2009 3:02 pm
- Location: Fayetteville,N.C.
Post
by JD-thomas » Fri Aug 06, 2010 6:01 pm
I have a 450 loader with the air cleaner that sits atop a 2 5/16" pipe. It is the one with a top and bottom plate with the clear looking plastic peice in between. Well mine cracked all into peices the plastic peice that is. Does any one have one of these or does anyone have a cap that will fit I aint picky anything will look better than the mt. dew can I have on top of it now. Thanks
John Deere 450A Loader
John Deere 317 Skid steer
-
MattE
- 430 crawler
- Posts: 82
- Joined: Sun Dec 27, 2009 11:37 am
- Location: Pennsylvania
Post
by MattE » Fri Aug 06, 2010 6:51 pm
there like 20$ through ma Deere just go buy one
-
JD-thomas
- 430 crawler
- Posts: 65
- Joined: Wed Dec 09, 2009 3:02 pm
- Location: Fayetteville,N.C.
Post
by JD-thomas » Fri Aug 06, 2010 7:16 pm
mk well thats good to know any idea on a part #?? I have a 450A and the const. website for deere doesnt show an A model, and the straight 450's, b's, and C's all show just a cap not the one witht the plastic center....
John Deere 450A Loader
John Deere 317 Skid steer
-
MattE
- 430 crawler
- Posts: 82
- Joined: Sun Dec 27, 2009 11:37 am
- Location: Pennsylvania
Post
by MattE » Fri Aug 06, 2010 7:35 pm
part number R28794
-
MattE
- 430 crawler
- Posts: 82
- Joined: Sun Dec 27, 2009 11:37 am
- Location: Pennsylvania
Post
by MattE » Fri Aug 06, 2010 7:38 pm
FYI you have to look up pre-cleaner, not air cleaner, they were two different parts breakdowns
-
JD-thomas
- 430 crawler
- Posts: 65
- Joined: Wed Dec 09, 2009 3:02 pm
- Location: Fayetteville,N.C.
Post
by JD-thomas » Sat Aug 07, 2010 5:59 pm
Thanks for the help!!!
John Deere 450A Loader
John Deere 317 Skid steer
Who is online
Users browsing this forum: No registered users and 156 guests