Power beyond sleeve

Shawn · Post by **Shawn** » Thu Oct 28, 2010 6:48 pm

Hi could someone please help me out, I need to find a power beyond sleeve. It's for my 450c trying to plumb in so I can hook up my hoe, been looking for one for a while with no luck so if anyone has any info you would make me very happy. Lost don't now where else to go thanks.

pop pop · Post by **pop pop** » Fri Oct 29, 2010 11:22 am

hi shawn, please describe what you are refering to as a power beyond sleeve.. i assume it is an extension off the pump to the rear with quik-tach fittings?
if not,, i'm baffled.
reason i ask is because i might know where one is.

shinnery · Post by **shinnery** » Fri Oct 29, 2010 4:48 pm

Pop-Pop
Here is a link to a picture of one,I just don't know if it will fit a 450 Hyd valve.
http://www.wetlinekits.com/shopping/pro ... 2&catId=86

Bryce

Smokey450C · Post by **Smokey450C** » Mon Nov 01, 2010 10:40 am

Hi Shawn,

There's been plenty of discussion on this site about hooking up back hoes. You could try a search and find out plenty! Here's an older discussion you might find helpful.

http://www.jdcrawlers.com/messageboard/ ... hlight=hoe

Good luck!

JDcrawlers Messageboard

Power beyond sleeve

Power beyond sleeve

Power beyond

Who is online