Just got used limb risers for my 450C dozer through a local equipment dealer. Don't know where they got 'em but not local. They just unbolted what they could, so I got everything I need except for the two supports that weld to the top of the ROPS.
I have not checked with Deere (Pape Machinery) on availability of these two parts (AT52358 and AT 52359), but does anyone have a solution to welding up some supports? The important thing is the limb risers need to unbolt from the supports. Page 55-4 from the parts manual is posted on my web site:
http://gallery.me.com/macaulay.steve#100233
Thanks for any advice!
450 limb riser top support question
450 limb riser top support question
JD 450C, Serial No. 316559T
formerly owned JD 350B, Serial No. 126738T
Kubota L3400 top-n-tilt
formerly owned JD 350B, Serial No. 126738T
Kubota L3400 top-n-tilt
Deere made there own limb risers back then now they are made for Deere for the newer crawlers I got some limb risers for my latest new 550Js and they were made by Hunt Tractor in Medford Oregon these were half the price of the same parts that came across the dealers parts counter and these guys make a lot of stuff like that .Here is the #1-888-791-7812 .Digitup.
Thanks Digitup. I just sent 'em an email. Here is a link to that part of their web site:digitup2 wrote:Deere made there own limb risers back then now they are made for Deere for the newer crawlers I got some limb risers for my latest new 550Js and they were made by Hunt Tractor in Medford Oregon these were half the price of the same parts that came across the dealers parts counter and these guys make a lot of stuff like that ..Digitup.
http://www.hunttractor.com/dozer_attach ... Limbrisers
They don't list limb risers for older JD crawlers. All I need are the two supports that weld to the ROPS, since I already have the stock JD limb risers. The JD web site indicates that these parts are no longer available. If Hunt Tractor does not have the parts or something that will work, I'll dig into my steelyard and make something.
JD 450C, Serial No. 316559T
formerly owned JD 350B, Serial No. 126738T
Kubota L3400 top-n-tilt
formerly owned JD 350B, Serial No. 126738T
Kubota L3400 top-n-tilt
You should see there used parts yard .I look at it and think -Dam and the price of scrap is going up !! this is a good place to be with a loader and dump truck .I am sure if you were there you would find something.Rust and yellow as far as the eye can see!!.Just noticed Cat has a down the road truck now although it is a re badged Binder .Digitup.
Who is online
Users browsing this forum: No registered users and 174 guests