350D radiator leaking

[skeetertom]

Just got a 350D and it has a leak from the radiator. What is involved in removing this radiator? Took a quick look before dark but was not sure how much needs to come apart. Thanks for any help

[vestor_guy]

the hood and front shroud has to come off. You will need an engine hoist for the front shroud.

[skeetertom]

Thanks I got it fixed for $80, tank was worn thru from a loose shroud. All back together and no leaks. Job went well with two of us and a mini excavator to lift the shroud.

[bonker81]

The front shroud actually pivots on two pins at the bottom. You need to remove 3 bolts down low on each side (5/8 or 3/4 if I remember correctly) and then 4 or 5 bolts underneath that connect to the belly pan. With those out it will pivot forward out of your way and stay there safely. I did this when I pulled my radiator, no need to completely remove it. After that, as long as nothing is too rusted up, it comes out easy.