Post support questions about your JD350 and newer crawler here
-
mini kahuna
- 1010 crawler
- Posts: 301
- Joined: Tue Oct 02, 2007 1:08 pm
- Location: rhode island
Post
by mini kahuna » Fri Apr 01, 2011 6:42 pm
the newer style setup is so much nicer and it's bulletproof.
you will be very happy with the repair and results.
-
DavTom
- 40C crawler
- Posts: 16
- Joined: Sat Mar 12, 2011 12:38 pm
Post
by DavTom » Thu Apr 07, 2011 2:49 pm
Torsional Isolater back together...
-
Lavoy
- Site Admin
- Posts: 10948
- Joined: Sun Apr 03, 2005 8:32 pm
- Location: North Dakota
-
Contact:
Post
by Lavoy » Thu Apr 07, 2011 7:31 pm
That'll never work with all them springs in there, should've left one or two out.
Lavoy
-
DavTom
- 40C crawler
- Posts: 16
- Joined: Sat Mar 12, 2011 12:38 pm
Post
by DavTom » Fri Apr 08, 2011 10:19 am
Engine is bolted in, I think I had an out of body experience torquing those bolts, still light headed... lol
Now to reconnect the wiring and hoses...
-
CatD8RII
- 1010 crawler
- Posts: 324
- Joined: Mon Jan 16, 2006 9:26 am
- Location: PA
Post
by CatD8RII » Sun Apr 10, 2011 7:24 pm
Not sure if im seeing it correctly, but on your third removal picture the right hand spring on the isolater is installed backwards. I wonder if the one that let go was as well?
-
DavTom
- 40C crawler
- Posts: 16
- Joined: Sat Mar 12, 2011 12:38 pm
Post
by DavTom » Sun Apr 10, 2011 8:03 pm
I noticed the backward spring too...
Who is online
Users browsing this forum: No registered users and 179 guests
