Post support questions about your JD350 and newer crawler here
-
philztoy
- 420 crawler
- Posts: 33
- Joined: Thu Sep 03, 2009 8:16 am
Post
by philztoy » Sat Apr 09, 2011 5:49 am
I pulled my 450C crawler backhoe into my pole barn for storage and I already cracked some corners on my concrete and chewed up the ashphalt where I transitioned from turf to ashphalt.
The ashphalt and concrete are both good quality at least 4" thick so I thought I would be ok.
I think I might get some long 2x12's and maybe plywood to put under when I store the machine.
Does anybody else have a better way of dsitributing the weight and saving the concrete. I dont really have a straight shot in so I need to get it on the ashphalt and turn it to get it in a direction for a straight shot into the pole barn.
Let me know your ideas if you would.
Thanks
Phil
-
gerald
- 440 crawler
- Posts: 225
- Joined: Fri Aug 13, 2010 9:32 am
- Location: elephant Butt nm
Post
by gerald » Sat Apr 09, 2011 8:07 am
Old convery belting. We used it in the mines where there wasen't steel rails in the cement.
1970 350 crawer/loader 93a back hoe
-
philztoy
- 420 crawler
- Posts: 33
- Joined: Thu Sep 03, 2009 8:16 am
Post
by philztoy » Sun Apr 10, 2011 7:30 pm
thats a good idea. I wonder where I could get some of that?
-
gerald
- 440 crawler
- Posts: 225
- Joined: Fri Aug 13, 2010 9:32 am
- Location: elephant Butt nm
Post
by gerald » Sun Apr 10, 2011 7:39 pm
Any road construction ,cement plant. You could have mine since its been rolled up for 20 years. I don,t know of any other use for it.
1970 350 crawer/loader 93a back hoe
-
Rick Kr
- 430 crawler
- Posts: 59
- Joined: Mon Jul 06, 2009 12:47 pm
Post
by Rick Kr » Sun Apr 10, 2011 8:43 pm
I have a couple of pieces of old 1/2 inch OSB plywood. Works great. I get the dozer lined up as straight as I can before I hit the concrete, otherwise you have to jump of the dozer and adjust the plywood if you try steering on the pieces.
Rick
JD 350B, 6 way blade
NH3930 4x4 w/loader & tree spade. AC WC.
-
pop pop
- 1010 crawler
- Posts: 490
- Joined: Thu Aug 27, 2009 12:07 am
- Location: chandler, arizona
Post
by pop pop » Fri Apr 15, 2011 3:31 pm
we used scabby old tires,, and they're a breeze to move :)
440icd/602/8a,,440icd/831/ripper,,440icd/831/3pt.,misc. 440 parts, i have 5 of these now, but i can stop anytime
-
philztoy
- 420 crawler
- Posts: 33
- Joined: Thu Sep 03, 2009 8:16 am
Post
by philztoy » Sun Apr 17, 2011 6:42 am
tires is a good idea too. At least something to do with old tires
Who is online
Users browsing this forum: No registered users and 97 guests