track adjuster guide bracket

Post support questions about your JD350 and newer crawler here
Post Reply
truck209
40C crawler
40C crawler
Posts: 23
Joined: Mon Apr 11, 2011 7:33 am
Location: Southern Vt.

track adjuster guide bracket

Post by truck209 » Fri Jun 17, 2011 2:40 am

Track adjuster guide bracket on 350 c dozer 1975 seems to pull up above bolts on when dozing. how would I fix this. Had too replace old adjuster it cracked on main body.
Top
KenP
350 crawler
350 crawler
Posts: 824
Joined: Tue Aug 26, 2008 2:05 pm

Post by KenP » Fri Jun 17, 2011 4:50 am

deleted
Last edited by KenP on Fri May 31, 2013 4:12 am, edited 1 time in total.
No longer posting on JDCrawlers
Top
User avatar
Willyr
2010 crawler
2010 crawler
Posts: 695
Joined: Sat Jul 17, 2010 3:03 am
Location: Downeast Maine (North of Ellsworth)

Post by Willyr » Fri Jun 17, 2011 6:03 am

I wonder if his shims are missing that holds the idler to the carriage?
former owner of a 1956 420c
All help is greatly appreciated.

Proud owner of a project 1952 JD 60

http://www.youtube.com/watch?v=nFehqXVd9z4
Top
User avatar
Lavoy
Site Admin
Site Admin
Posts: 10948
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:
Contact Lavoy

Post by Lavoy » Fri Jun 17, 2011 7:47 am

You will most likely need to remove the front idler and replace the wear plates on the idler brackets and track frames. They are current from Deere, or I can get them as well.
Lavoy
Top
Post Reply

Return to “Late model JD crawler technical support”

Who is online

Users browsing this forum: TXPower and 161 guests