350 dozer doesn't move

dhassell · Post by **dhassell** » Sun Jul 03, 2011 2:28 pm

I have a 350 dozer that doesn't move at all.#T4F35D-100635T, it is a wide tracks. It's making a bad grinding noise under the drivers seat in every gear,forword and reverse.

KenP · Post by **KenP** » Sun Jul 03, 2011 4:42 pm

deleted

dhassell · Post by **dhassell** » Mon Jul 04, 2011 1:02 am

Thanks for the advice, the question now is, tear it apart or sell it. It has only 4k hrs, super clean. it only gets used in the winter time to move snow....cost wise to get it operating again.

KenP · Post by **KenP** » Mon Jul 04, 2011 3:51 am

deleted

dhassell · Post by **dhassell** » Mon Jul 04, 2011 4:43 pm

I am going to tear in to it this week, i will update my findings as soon as i find out.

dhassell · Post by **dhassell** » Tue Jul 05, 2011 9:17 pm

Took a look at the dozer today , the noise is definitely coming from under the floor plate, not from under the seat...any suggestions .

KenP · Post by **KenP** » Wed Jul 06, 2011 3:57 am

deleted

dhassell · Post by **dhassell** » Wed Jul 06, 2011 5:24 pm

If the coupler is stripped,and the shafts are destroyed. what ($) amount am i looking at...it's a super clean dozer, i hate to sell it for parts.

KenP · Post by **KenP** » Wed Jul 06, 2011 7:23 pm

deleted

JDcrawlers Messageboard