Post support questions about your JD350 and newer crawler here
-
dhassell
- MC crawler
- Posts: 5
- Joined: Thu Jun 30, 2011 8:24 pm
- Location: napa, ca
Post
by dhassell » Sun Jul 03, 2011 2:28 pm
I have a 350 dozer that doesn't move at all.#T4F35D-100635T, it is a wide tracks. It's making a bad grinding noise under the drivers seat in every gear,forword and reverse.
-
KenP
- 350 crawler
- Posts: 824
- Joined: Tue Aug 26, 2008 2:05 pm
Post
by KenP » Sun Jul 03, 2011 4:42 pm
deleted
Last edited by
KenP on Fri May 31, 2013 4:27 am, edited 1 time in total.
No longer posting on JDCrawlers
-
dhassell
- MC crawler
- Posts: 5
- Joined: Thu Jun 30, 2011 8:24 pm
- Location: napa, ca
Post
by dhassell » Mon Jul 04, 2011 1:02 am
Thanks for the advice, the question now is, tear it apart or sell it. It has only 4k hrs, super clean. it only gets used in the winter time to move snow....cost wise to get it operating again.
-
KenP
- 350 crawler
- Posts: 824
- Joined: Tue Aug 26, 2008 2:05 pm
Post
by KenP » Mon Jul 04, 2011 3:51 am
deleted
Last edited by
KenP on Fri May 31, 2013 4:28 am, edited 1 time in total.
No longer posting on JDCrawlers
-
dhassell
- MC crawler
- Posts: 5
- Joined: Thu Jun 30, 2011 8:24 pm
- Location: napa, ca
Post
by dhassell » Mon Jul 04, 2011 4:43 pm
I am going to tear in to it this week, i will update my findings as soon as i find out.
-
dhassell
- MC crawler
- Posts: 5
- Joined: Thu Jun 30, 2011 8:24 pm
- Location: napa, ca
Post
by dhassell » Tue Jul 05, 2011 9:17 pm
Took a look at the dozer today , the noise is definitely coming from under the floor plate, not from under the seat...any suggestions .
-
KenP
- 350 crawler
- Posts: 824
- Joined: Tue Aug 26, 2008 2:05 pm
Post
by KenP » Wed Jul 06, 2011 3:57 am
deleted
Last edited by
KenP on Fri May 31, 2013 4:28 am, edited 1 time in total.
No longer posting on JDCrawlers
-
dhassell
- MC crawler
- Posts: 5
- Joined: Thu Jun 30, 2011 8:24 pm
- Location: napa, ca
Post
by dhassell » Wed Jul 06, 2011 5:24 pm
If the coupler is stripped,and the shafts are destroyed. what ($) amount am i looking at...it's a super clean dozer, i hate to sell it for parts.
-
KenP
- 350 crawler
- Posts: 824
- Joined: Tue Aug 26, 2008 2:05 pm
Post
by KenP » Wed Jul 06, 2011 7:23 pm
deleted
No longer posting on JDCrawlers
Who is online
Users browsing this forum: No registered users and 125 guests