350 track master track pin

Post support questions about your JD350 and newer crawler here
Post Reply
andregrondin
440 crawler
440 crawler
Posts: 215
Joined: Mon Apr 18, 2011 6:51 am
Location: Granby,Québec, Canada

350 track master track pin

Post by andregrondin » Mon Jul 04, 2011 10:46 am

Hello !

Anyone has a pic of what the master track pin looks like please ,
I haven't received my repair manual yet , I need to put back the track
on my 350 and I never seen what the master pin looks like .
Dig in boy !!
J-D 350 straight 1966
model # = T4F3D
serial # = 08883T

J-D 690-B 1980
model # = D690B
serial # = 007364T

Mack RB688S 1990 dumper

KenP
350 crawler
350 crawler
Posts: 824
Joined: Tue Aug 26, 2008 2:05 pm

Post by KenP » Mon Jul 04, 2011 11:44 am

deleted
Last edited by KenP on Fri May 31, 2013 12:04 pm, edited 1 time in total.
No longer posting on JDCrawlers

andregrondin
440 crawler
440 crawler
Posts: 215
Joined: Mon Apr 18, 2011 6:51 am
Location: Granby,Québec, Canada

Post by andregrondin » Mon Jul 04, 2011 11:53 am

Hi !

Ken P. Thank you for the tip ! any help is allways welcome !!
Dig in boy !!
J-D 350 straight 1966
model # = T4F3D
serial # = 08883T

J-D 690-B 1980
model # = D690B
serial # = 007364T

Mack RB688S 1990 dumper

andregrondin
440 crawler
440 crawler
Posts: 215
Joined: Mon Apr 18, 2011 6:51 am
Location: Granby,Québec, Canada

Post by andregrondin » Wed Jul 06, 2011 6:16 am

Hi !

Lucky me I had put back the track on the 350 without removing the track !
by the way I haven't find the master pin yet anyway !!! but still looking for it !!
Dig in boy !!
J-D 350 straight 1966
model # = T4F3D
serial # = 08883T

J-D 690-B 1980
model # = D690B
serial # = 007364T

Mack RB688S 1990 dumper

User avatar
gerald
440 crawler
440 crawler
Posts: 225
Joined: Fri Aug 13, 2010 9:32 am
Location: elephant Butt nm

Post by gerald » Thu Jul 07, 2011 7:36 am

It may be weled. I ordered a pin from levoy an drove it in. tack weled it still there today.
1970 350 crawer/loader 93a back hoe

andregrondin
440 crawler
440 crawler
Posts: 215
Joined: Mon Apr 18, 2011 6:51 am
Location: Granby,Québec, Canada

Post by andregrondin » Mon Aug 22, 2011 6:13 am

Hi !

Found the pin and she came out very well !! yeah a couple of sledge hammer hit with a brass rod and tad bit of heat , but all went good .
Dig in boy !!
J-D 350 straight 1966
model # = T4F3D
serial # = 08883T

J-D 690-B 1980
model # = D690B
serial # = 007364T

Mack RB688S 1990 dumper

Post Reply

Who is online

Users browsing this forum: B Town, yukonjack and 103 guests