Post support questions about your JD350 and newer crawler here
-
andregrondin
- 440 crawler
- Posts: 215
- Joined: Mon Apr 18, 2011 6:51 am
- Location: Granby,Québec, Canada
Post
by andregrondin » Fri Sep 02, 2011 9:16 pm
Tom in Mo. wrote:I'm having fun following this topic. The pictures are good. I especially like the 2 inch trailer ball on the drawbar.
I like the 2 inch ball but let me tell you right now it is pretty useless ! lol
and I'm very glad to have this forum to get help and info !!!
thank you for the comments on the pics , with those I try to give a bit back of what I got from help for the next fellow that will have to do the same job !
aren't we here to learn & help each other ?
Dig in boy !!
J-D 350 straight 1966
model # = T4F3D
serial # = 08883T
J-D 690-B 1980
model # = D690B
serial # = 007364T
Mack RB688S 1990 dumper
-
jtrichard
- 350 crawler
- Posts: 1883
- Joined: Sun Jan 11, 2009 9:48 pm
- Location: Joshua Tree CA
Post
by jtrichard » Fri Sep 02, 2011 10:02 pm
i have a 2 5/16 ball on my 2010 i move mobile homes with it
2010 with 622 dozer with mod. 35 ripper and a 2010 with 622 dozer bought in 1969 and a 2010 loader with drott and mod. 36 ripper
-
andregrondin
- 440 crawler
- Posts: 215
- Joined: Mon Apr 18, 2011 6:51 am
- Location: Granby,Québec, Canada
Post
by andregrondin » Sat Sep 03, 2011 3:48 pm
Hi !
I'm back from finishing the dismantling of my steering clutch , there is no way that I can enter the tube further inside the throwout bearing,
I'm waiting for the right steel disk to come in .
I fixed a couple of other things on the dozer in the mean time , so next time I'm out to work with it should be all good and pushing fine hopefully !!
more pics :
I was looking if I could put the tube deeper but the tube seems to be at his farthes position , here is the pic and measure .
Dig in boy !!
J-D 350 straight 1966
model # = T4F3D
serial # = 08883T
J-D 690-B 1980
model # = D690B
serial # = 007364T
Mack RB688S 1990 dumper
-
andregrondin
- 440 crawler
- Posts: 215
- Joined: Mon Apr 18, 2011 6:51 am
- Location: Granby,Québec, Canada
Post
by andregrondin » Mon Sep 19, 2011 11:31 am
Hi !
The dozer is back on track !!! working good !
thank you all for the help !!
will post pics latter
Dig in boy !!
J-D 350 straight 1966
model # = T4F3D
serial # = 08883T
J-D 690-B 1980
model # = D690B
serial # = 007364T
Mack RB688S 1990 dumper
-
jtrichard
- 350 crawler
- Posts: 1883
- Joined: Sun Jan 11, 2009 9:48 pm
- Location: Joshua Tree CA
Post
by jtrichard » Mon Sep 19, 2011 1:00 pm
i see you found your old steel looks a little different.... sounds like your up and running good work
2010 with 622 dozer with mod. 35 ripper and a 2010 with 622 dozer bought in 1969 and a 2010 loader with drott and mod. 36 ripper
-
andregrondin
- 440 crawler
- Posts: 215
- Joined: Mon Apr 18, 2011 6:51 am
- Location: Granby,Québec, Canada
Post
by andregrondin » Tue Sep 20, 2011 6:59 am
Hi !
Thank you , now it run's like a Deere !!!
back to dirt pushing !!
Dig in boy !!
J-D 350 straight 1966
model # = T4F3D
serial # = 08883T
J-D 690-B 1980
model # = D690B
serial # = 007364T
Mack RB688S 1990 dumper
Who is online
Users browsing this forum: No registered users and 143 guests