Looking for 4 in 1 bucket

MattE · Post by **MattE** » Wed Aug 10, 2011 10:40 am

I'm looking to but a 4 in 1 bucket for my 350B

Does anyone have one or know where one might be for a reasonable price in the NW Pennsylvania region.

Thanks,

Matt

Bruce · Post by **Bruce** » Thu Aug 11, 2011 3:55 pm

I am also looking for a drott 4 in 1 bucket for a straight 350 and am in the Albany ny area. Having one of these buckets make the grading and leveling much easier.

JWB Contracting · Post by **JWB Contracting** » Thu Aug 11, 2011 4:33 pm

How about building an angle blade attachement that attaches to the loader in place of a bucket?

All of the deere loader came with an extra valve to run the angling cylinders.

We have two of these set ups on our widepad 350C loader hoes. You use the bucket tilt function to tilt the dozer assembly and the extra valve to angle.

I can do a better job leveling and grading with these over our 450C and 450G dozer machines.

Just something to consider instead of a 4 in 1 bucket.

I am going to have to take some pictures one of these days to show these widepads in action.

Bruce · Post by **Bruce** » Fri Aug 12, 2011 5:47 am

I would love to see some pics. Is this somethind attached to the loader bucket or in place of the bucket?

JWB Contracting · Post by **JWB Contracting** » Fri Aug 12, 2011 7:24 am

This is a replacement for the loader bucket. They are out on the jobsite right now. I only help my Dad out on the weekends.

I will take some pics one of these days.

Tigerhaze · Post by **Tigerhaze** » Fri Aug 12, 2011 8:41 am

Bruce wrote:I would love to see some pics. Is this somethind attached to the loader bucket or in place of the bucket?

There was an attachment for 2010 loaders that was a blade that fit in front of the loader bucket- it supposedly required minimal work to detach and reattach but I have never seen one in person so can't tell you for sure. I saw it in my 2010 operators manual- Lavoy would probably know the attachment number and whether he has seen one in person.

KenP · Post by **KenP** » Fri Aug 12, 2011 10:56 am

deleted

jtrichard · Post by **jtrichard** » Fri Aug 12, 2011 11:15 am

find a 6310 blade and modify it would be your best bet for a under bucket blade. Years ago before i knew jd made such a thing i seen a 2010 from a distance with under bucket blade and thought they had shop built it i now wish i had got a closer look

JDcrawlers Messageboard

Looking for 4 in 1 bucket

Looking for 4 in 1 bucket

Here is a better option

Angle dozer

Who is online