Post support questions about your JD350 and newer crawler here
-
gerald
- 440 crawler
- Posts: 225
- Joined: Fri Aug 13, 2010 9:32 am
- Location: elephant Butt nm
Post
by gerald » Mon Aug 15, 2011 10:03 pm
I guess muridic acid would loosen it then wash it out with water good then tear it down an would be clean
1970 350 crawer/loader 93a back hoe
-
crawler123
- 430 crawler
- Posts: 97
- Joined: Sat Jul 30, 2011 1:36 pm
- Location: montana
Post
by crawler123 » Tue Aug 16, 2011 7:21 am
Hi Gerald
I think that phosphoric acid would probably take care of the rust also.
No telling what it would do to seals or other parts in there.
I put 2 rusty bolts in a solution of "IRON OUT" overnite. Pretty amazing, most of the rust was gone in the morning. Interesting.
-
Lavoy
- Site Admin
- Posts: 10948
- Joined: Sun Apr 03, 2005 8:32 pm
- Location: North Dakota
-
Contact:
Post
by Lavoy » Tue Aug 16, 2011 9:12 am
I know there are some products that are supposed to eat and convert rust, but all of them are for surface rust. I would seriously question their use on an assembled clutch.
On the whole, there are no easy fixes to stuck steering clutches, if there was, I would have found it by now.
Lavoy
Who is online
Users browsing this forum: No registered users and 170 guests