Hi !
my 350 sit in the garage waiting for my parts to come , all the final drive
been removed all parts had been cleaned ,
Now do I put grease (what kind ) on the spline on shaft or anti-seized paste ?
On all linkage Lavoy recomand to put anti-seized witch I will do !
any other trick of the trade would be appreciated for installation !!
regards
350 steering clutch repair
-
- 440 crawler
- Posts: 215
- Joined: Mon Apr 18, 2011 6:51 am
- Location: Granby,Québec, Canada
350 steering clutch repair
Dig in boy !!
J-D 350 straight 1966
model # = T4F3D
serial # = 08883T
J-D 690-B 1980
model # = D690B
serial # = 007364T
Mack RB688S 1990 dumper
J-D 350 straight 1966
model # = T4F3D
serial # = 08883T
J-D 690-B 1980
model # = D690B
serial # = 007364T
Mack RB688S 1990 dumper
-
- 440 crawler
- Posts: 215
- Joined: Mon Apr 18, 2011 6:51 am
- Location: Granby,Québec, Canada
Hi !
I started to re-assemble the steering clutch , linkage had been put back
with the famous anti-seize paste , I'm waiting for the parts to come in
( thank's to Lavoy Wilcox with the help) . final shaft bearings and oil seal
are back in place with the proper adjustment .
can't wait for the parts to come in and then finish the re-instalation !
I started to re-assemble the steering clutch , linkage had been put back
with the famous anti-seize paste , I'm waiting for the parts to come in
( thank's to Lavoy Wilcox with the help) . final shaft bearings and oil seal
are back in place with the proper adjustment .
can't wait for the parts to come in and then finish the re-instalation !
Dig in boy !!
J-D 350 straight 1966
model # = T4F3D
serial # = 08883T
J-D 690-B 1980
model # = D690B
serial # = 007364T
Mack RB688S 1990 dumper
J-D 350 straight 1966
model # = T4F3D
serial # = 08883T
J-D 690-B 1980
model # = D690B
serial # = 007364T
Mack RB688S 1990 dumper
Who is online
Users browsing this forum: No registered users and 129 guests