reverser is over heating
reverser is over heating
I recently changed the seals in the reverser on my 350B, when i went to put the radiator back in i couldn't remember which line connected to what side of the reverser oil cooler. now after running for an hour or so the shifting gets real slow, i assume this is from over heating. I believe i connected the lower hose on the control valve housing to the bottom right of the radiator as your standing in front looking at it. Can any one tell me if this is correct as i cant find it in my manual, or is it likely something else?
Who is online
Users browsing this forum: No registered users and 73 guests