BEST WAY TO REMOVE THE HLR TRANNY?

Post support questions about your JD350 and newer crawler here
Post Reply
greg noble
MC crawler
MC crawler
Posts: 8
Joined: Tue Sep 06, 2011 4:30 pm
Location: newfoundland canada

BEST WAY TO REMOVE THE HLR TRANNY?

Post by greg noble » Wed Sep 07, 2011 7:58 pm

Hi, i have been doing a lot off reading tryin to prepare myself for the massive job of rebuilding the HLR in my 450e.
i noticed that the tech manual instructs you to remove the trans and final drive through the rear of the unit, but most people that i have read about take the engine out and remove it from the front.
What is the fastest easiest way? i guess if you take the engine out then you really don`t remove the trans,you just repair it in the dozers belly huh?
1986 jd 450e, 1971 jd350.
Top
User avatar
Tigerhaze
350 crawler
350 crawler
Posts: 2278
Joined: Thu Jul 06, 2006 12:13 pm
Location: West-Central MO

Post by Tigerhaze » Wed Sep 07, 2011 8:10 pm

This thread discussion with Digitup will help- he is one of the resident experts on this board for the 450 crawlers:

http://www.jdcrawlers.com/messageboard/ ... ansmission
(1) JD Straight 450 crawler dozer with manual outside blade; (2) JD 2010 diesel crawler loaders; (1) JD 2010 diesel dozer with hydraulic 6-way blade; (2) Model 50 backhoe attachments, misc. other construction equipment
Top
Post Reply

Return to “Late model JD crawler technical support”

Who is online

Users browsing this forum: No registered users and 181 guests