Hi, i have been doing a lot off reading tryin to prepare myself for the massive job of rebuilding the HLR in my 450e.
i noticed that the tech manual instructs you to remove the trans and final drive through the rear of the unit, but most people that i have read about take the engine out and remove it from the front.
What is the fastest easiest way? i guess if you take the engine out then you really don`t remove the trans,you just repair it in the dozers belly huh?
BEST WAY TO REMOVE THE HLR TRANNY?
-
- MC crawler
- Posts: 8
- Joined: Tue Sep 06, 2011 4:30 pm
- Location: newfoundland canada
BEST WAY TO REMOVE THE HLR TRANNY?
1986 jd 450e, 1971 jd350.
This thread discussion with Digitup will help- he is one of the resident experts on this board for the 450 crawlers:
http://www.jdcrawlers.com/messageboard/ ... ansmission
http://www.jdcrawlers.com/messageboard/ ... ansmission
(1) JD Straight 450 crawler dozer with manual outside blade; (2) JD 2010 diesel crawler loaders; (1) JD 2010 diesel dozer with hydraulic 6-way blade; (2) Model 50 backhoe attachments, misc. other construction equipment
Who is online
Users browsing this forum: No registered users and 174 guests