blade controls

lp14255 · Post by **lp14255** » Fri Oct 07, 2011 4:32 pm

i've done some dumb things but this one takes the cake. i took my 350's blade controls apart to put in new seals and to rework the roll pins on the t-handle assm. to take out all the slope. i tought i would be smart and take some pictures with my phone just in case i need them . yup i need them know BUT i broke my phone at work and lost everything on it , encluding the pics of the controls. does anyone have some pics of the control handle to help me figure it out. thanks again.

FL450B · Post by **FL450B** » Sun Oct 09, 2011 9:18 pm

jump on jd web sight and look at a part book for your machine also the owners manaul has some good pictues of the t handle

digitup2 · Post by **digitup2** » Mon Oct 10, 2011 3:20 pm

Several years ago I replaced those little twisted cast pieces of steel all were gotten from across the dealers parts counter .If you wand some dollar $hock try replacing them and the pins .But it sure made the control nice and quick to handle .someone take a photo of the working order for this guy I can tell you one thing there is only one way for those pieces to go and the washers go in between cast pieces.Deere added some nylon washers at one time but I don't know if they discontinued that or not? .Digitup.

lp14255 · Post by **lp14255** » Wed Oct 12, 2011 8:00 pm

i looked through all the books i could find and on the jd website no such luck. but i sat down and started fresh and got it back together. put new roll pins and some bushings in , just like new again.

Post by **Lavoy** » Thu Oct 13, 2011 9:19 am

You know, not to laugh at your cell phone predicament, but I was under the assumption that only I could do something like that.

Lavoy

18vtx00 · Post by **18vtx00** » Thu Oct 13, 2011 3:09 pm

lp14255 wrote:i've done some dumb things but this one takes the cake. i took my 350's blade controls apart to put in new seals and to rework the roll pins on the t-handle assm. to take out all the slope. i tought i would be smart and take some pictures with my phone just in case i need them . yup i need them know BUT i broke my phone at work and lost everything on it , encluding the pics of the controls. does anyone have some pics of the control handle to help me figure it out. thanks again.

It's easiest to send in text form as to not have to resize the pics. If you email me your # I'll text you pics of my handle tonight. Good luck!

JDcrawlers Messageboard

blade controls

blade controls

pictures

Re: blade controls

Who is online