JD 450 tracks

Post support questions about your JD350 and newer crawler here
Post Reply
ld7mile
40C crawler
40C crawler
Posts: 20
Joined: Thu Aug 12, 2010 3:20 am
Location: Pulaski County, Virginia

JD 450 tracks

Post by ld7mile » Thu Nov 03, 2011 4:39 am

Will JD 450 tracks fit a JD 1010?
ljs
Top
User avatar
Lavoy
Site Admin
Site Admin
Posts: 10948
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:
Contact Lavoy

Post by Lavoy » Thu Nov 03, 2011 8:16 am

Not even close, 350 will if you change sprockets.
Lavoy
Top
ld7mile
40C crawler
40C crawler
Posts: 20
Joined: Thu Aug 12, 2010 3:20 am
Location: Pulaski County, Virginia

350 sprockets

Post by ld7mile » Tue Jul 10, 2012 10:17 am

Will Jd 350 sprockets bolt to a JD 1010, or do they have to be welded? How much should I have to pay for a new set of 350 chains, and sprockets and where is the best place to buy them?
ljs
Top
User avatar
Willyr
2010 crawler
2010 crawler
Posts: 695
Joined: Sat Jul 17, 2010 3:03 am
Location: Downeast Maine (North of Ellsworth)

Post by Willyr » Tue Jul 10, 2012 4:23 pm

grin the best place to buy them is with Lavoy (its his website).

Otherwise your on your own. I wont go that route again, sorry for the first time Lavoy. grin
former owner of a 1956 420c
All help is greatly appreciated.

Proud owner of a project 1952 JD 60

http://www.youtube.com/watch?v=nFehqXVd9z4
Top
User avatar
shinnery
350 crawler
350 crawler
Posts: 774
Joined: Fri Jan 27, 2006 4:55 pm
Location: Hawley, Texas

Post by shinnery » Tue Jul 10, 2012 10:36 pm

Awww Willy, you ought to post that list again. He he he he
Bryce
:lol: :roll: :wink:
No trees were hurt in the creation of this message.
But, many electrons were terribly bothered.

440IC/602, 2-440ICD/831 MM UBU-LP, 445N-LP, 445E-LP, BIG MO 400-M, 4 Star-LP M5-D, M5-LP, M602-LP, M670-LP, G900-LP, G900-D, G1000 Vista-LP Case 580CK
Top
User avatar
Willyr
2010 crawler
2010 crawler
Posts: 695
Joined: Sat Jul 17, 2010 3:03 am
Location: Downeast Maine (North of Ellsworth)

Post by Willyr » Wed Jul 11, 2012 8:48 am

If I did I tend to think Lavoy might consider banning me. Yet I like this board too much, so I will walk the straight and narrow path.
former owner of a 1956 420c
All help is greatly appreciated.

Proud owner of a project 1952 JD 60

http://www.youtube.com/watch?v=nFehqXVd9z4
Top
cdunn
440 crawler
440 crawler
Posts: 139
Joined: Mon Jul 20, 2009 11:49 am
Location: Shiloh, Georgia

Post by cdunn » Wed Jul 11, 2012 4:10 pm

I would have to think about it a while before I welded the sprockets onto any crawler, if that is what you mean.
57 420c 86 Ford 4600
67 350 dozer
66 350 loader
58 Oliver OC-4
48 8n Ford
49 Farmall Cub
Struck Mini-Dozer
Top
User avatar
Tigerhaze
350 crawler
350 crawler
Posts: 2278
Joined: Thu Jul 06, 2006 12:13 pm
Location: West-Central MO

Re: 350 sprockets

Post by Tigerhaze » Thu Jul 12, 2012 8:42 am

ld7mile wrote:Will Jd 350 sprockets bolt to a JD 1010, or do they have to be welded? How much should I have to pay for a new set of 350 chains, and sprockets and where is the best place to buy them?
I think LD meant whether there are 350 sprocket rims that are welded to the center of a 1010 sprocket hub, and I think the answer is yes but you would need to confirm with others such as Lavoy to see if they are still available.

Lavoy is always my first stop for parts, but shipping 350 rails can get pretty expensive so I would first check with Lavoy on 350 rail availability and shipping costs and go from there.
(1) JD Straight 450 crawler dozer with manual outside blade; (2) JD 2010 diesel crawler loaders; (1) JD 2010 diesel dozer with hydraulic 6-way blade; (2) Model 50 backhoe attachments, misc. other construction equipment
Top
User avatar
Lavoy
Site Admin
Site Admin
Posts: 10948
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:
Contact Lavoy

Post by Lavoy » Fri Jul 13, 2012 10:22 am

No, 350 sprockets will not bolt up, but you can cut the rim off and weld them on your 1010 sprockets.
Lavoy
Top
Post Reply

Return to “Late model JD crawler technical support”

Who is online

Users browsing this forum: No registered users and 147 guests