6 way blade
-
- MC crawler
- Posts: 6
- Joined: Sun Aug 26, 2012 9:33 pm
- Location: chardon oh
6 way blade
i have a power 6 way blade on my 350 and i have noticed when i use the 6th function the blade will go down farther if i lean it to the left side then the right side i know the cylinder is moving full stroke and not binding and the arrows are about 2 inches off from each other when the blade is level i dont really see any thing worn does any one have any ideas thanks
jd 450b loader 450c dozer 350 dozer
i don't know if its the same on a 350 but a 2010 has the same basic blade and one side will go lower than then the other thats why they moved the ram to the top center on the later machines
2010 with 622 dozer with mod. 35 ripper and a 2010 with 622 dozer bought in 1969 and a 2010 loader with drott and mod. 36 ripper
Who is online
Users browsing this forum: Google [Bot] and 104 guests