6 way blade

Post support questions about your JD350 and newer crawler here
Post Reply
rustydeeretech
MC crawler
MC crawler
Posts: 6
Joined: Sun Aug 26, 2012 9:33 pm
Location: chardon oh

6 way blade

Post by rustydeeretech » Sun Sep 16, 2012 9:25 pm

i have a power 6 way blade on my 350 and i have noticed when i use the 6th function the blade will go down farther if i lean it to the left side then the right side i know the cylinder is moving full stroke and not binding and the arrows are about 2 inches off from each other when the blade is level i dont really see any thing worn does any one have any ideas thanks
jd 450b loader 450c dozer 350 dozer
Top
User avatar
jtrichard
350 crawler
350 crawler
Posts: 1883
Joined: Sun Jan 11, 2009 9:48 pm
Location: Joshua Tree CA

Post by jtrichard » Sun Sep 16, 2012 10:58 pm

i don't know if its the same on a 350 but a 2010 has the same basic blade and one side will go lower than then the other thats why they moved the ram to the top center on the later machines
2010 with 622 dozer with mod. 35 ripper and a 2010 with 622 dozer bought in 1969 and a 2010 loader with drott and mod. 36 ripper
Top
jmanatee
MC crawler
MC crawler
Posts: 4
Joined: Tue Apr 24, 2012 5:26 pm

Post by jmanatee » Mon Sep 17, 2012 8:29 pm

my 350b 6way blade goes lower one way then the other. I couldnt tell you which way unless I went outside and fired it up.
Top
Post Reply

Return to “Late model JD crawler technical support”

Who is online

Users browsing this forum: No registered users and 38 guests