350 reverser
-
- 430 crawler
- Posts: 57
- Joined: Tue Dec 20, 2011 1:58 pm
- Location: nw mn
350 reverser
Last winter with foroms help I replaced seal in reverser. Now after one seasons use I seem to have another reverser issue. Seems to work ok until it gets warm then does not want to move machine. If I use manual tranny to backup then moves machine. Thinking it must be a pressure problem but not sure. Is there a cooler for fluid in reverser? Also am I hurting anything by just using manual tranny instead of reverser? Thanks
You really need to resolve why your reverser doesn't want to function in reverse. I assume you have checked your fluid level in the reverser? Make sure you have the proper amount of fluid in the reverser and then I would have the pressures checked to see what is going on. Yes, there is a cooler for the reverser. Should be two lines leading up from the left side of the reverser to the bottom of the radiator.
40 plus years working on JD 350s, 400Gs, 450s and other equipment both Ag and Construction.
Who is online
Users browsing this forum: No registered users and 101 guests