Log arch bolt up
-
- 40C crawler
- Posts: 21
- Joined: Thu May 20, 2010 2:08 pm
Log arch bolt up
Can anybody out there provide me with pictures of how a log arch bolts up on a 350 with a 3315 winch? Just got the arch that came off of a 450. Not sure how much of a problem it is to put it on a 350. Any help would be appreciated.
Builder Bob
I think the arch will bolt on just fine. the winches are only built for the 350 or 450 and cannot be exchanged. This setup is on my 350b.
Scott
450`s c-dozer 6 way, b-loader.
350`s c-loader + ripper, b-loader with winch arch. B-loader with dozer pads
backhoe attachment.
1010 loader with forks for round bales
a few 610 Bobcats. many attachments
350`s c-loader + ripper, b-loader with winch arch. B-loader with dozer pads
backhoe attachment.
1010 loader with forks for round bales
a few 610 Bobcats. many attachments
- JD430C
- 1010 crawler
- Posts: 350
- Joined: Tue May 03, 2005 11:00 pm
- Location: Northfield, Vermont
- Contact:
The arches are the same for the 350, 450 up to Es, and 550s up to Bs. The 450/550 uses an extra bracket on the bottom, but its not welded to the arch so its easy to swap it out. It bolts to the back of the finals and on top of the winch. I will see if I have a pic or 2 for you.
Andrew
Andrew
jds- 450B, 450C, 550, 4020, 3140 MFWD, 5200 MFWD
Who is online
Users browsing this forum: No registered users and 99 guests