I will be the first to acknowlege that we all are in our busy season. I may have failed to mention that I have the tech manuall operators and parts books for a 450 b tractor. I have searched them all for info and have found none for the ripper. However I have found pics of the trans and cannot tell if there are any external line that go to the back left side. A simple ? of does anybody have any experience with this I guees was to much to ask.
I have said in the past and will say again there is a wealth of knowlege here. Sometimes it seems as though it is selective. I did not mean to offend anybody here and if any was taken then so be it. I have a pretty good mech ability,but have not done alot of work on dozers but am learning.
So in short.I have the books and have read them I will continue to do so and will figure it out in the near future. Good luck to all in your venturs whatever they may be, Rock digger
now that you have responded
-
rock digger
- 420 crawler
- Posts: 37
- Joined: Tue Mar 13, 2012 9:15 pm
- Location: minnesota
now that you have responded
There is always another rock under this one!
Hi i cant help you with oil leak buy as for the ripper 450B takes a 3100 or 3110 if you go to jd parts online you can see parts book on it ... you can also get the parts and operators manuals for the 3100/3110 on ebay
2010 with 622 dozer with mod. 35 ripper and a 2010 with 622 dozer bought in 1969 and a 2010 loader with drott and mod. 36 ripper
Who is online
Users browsing this forum: No registered users and 160 guests