Welded the 450b tranny case

Post support questions about your JD350 and newer crawler here
Post Reply
rock digger
420 crawler
420 crawler
Posts: 37
Joined: Tue Mar 13, 2012 9:15 pm
Location: minnesota

Welded the 450b tranny case

Post by rock digger » Mon Jan 13, 2014 9:16 pm

Well I finally got to work on the dozer and got her welded. I plowed alot of snow with it today and so far no leaks. I also found some craks in the side frames and welded those. It has been a long haul and alot work and research. It surer is good to have it going again.

Rock Digger,
There is always another rock under this one!
Top
User avatar
Paul Buhler
350 crawler
350 crawler
Posts: 991
Joined: Wed May 21, 2008 6:25 pm
Location: Killington, VT

Post by Paul Buhler » Mon Jan 13, 2014 9:41 pm

Congratulations and good luck. I hope your welds hold and your machine hangs together for a long time.
Paul Buhler
Killington, VT
420c 5 roll with 62 blade, FOPS, and Gearmatic 8a winch
Top
Post Reply

Return to “Late model JD crawler technical support”

Who is online

Users browsing this forum: No registered users and 22 guests