streering clutch rebuild

[lp14255]

Im replacing my steering clutches on my 350. What kind of prep can i do to make everything work and last longer. Any help would be very helpful. Thanks.

[jtrichard]

go to this post pages 5 and 6 it is for a 450 but its the same basics http://www.jdcrawlers.com/messageboard/ ... 8&start=60

[rcs110]

hope every thing comes apart easy. I ran into a frozen shaft had to build a puller. i posted pictures as i went along in fixing the steering clutches.

http://www.jdcrawlers.com/messageboard/ ... highlight=

[lp14255]

Everything came apart fine. Im going to clean all the rust off and give everything a coat of rustoleum paint, some anti-seize on all the moving parts and gasket seal on the housing when i put the sides back on and hope this will do the job. I guess this time i will keep the dozer in the shed out of the rain.