450c winch question
-
- 40C crawler
- Posts: 14
- Joined: Thu Jul 26, 2012 12:59 am
- Location: new jersey
450c winch question
Hello all hope everyone is enjoying the summer. I am looking at a 450c with a winch on the back. Is the winch hydraulically run or off of a pto? If it is run off a auxilary hydraulic valve can I disconnect the winch and use that valve/circuit to run a grapple?? Any thoughts or suggestions? Thanks Howard
-
- 2010 crawler
- Posts: 597
- Joined: Thu Aug 27, 2009 10:08 pm
- Location: Edmonton, Alberta
450 Winches
Lots of 450 winches out there, you can tell if it is a 450 winch if the input shaft is centred. They run off a live out put shaft and is operated by a cabled lever. I think my dad has a pile of 4 or 5 of them.
They work well enough, same winch as the older 440 and 540 skidders.
They work well enough, same winch as the older 440 and 540 skidders.
Jason Benesch
John Deere 420, 430, 440 & 350C With 3 Point Hitch
John Deere 400G With Winch
John Deere 2010 Crawler Dozer
John Deere 420, 430, 435 & 440 Wheel Tractors
John Deere 420, 430, 440 & 350C With 3 Point Hitch
John Deere 400G With Winch
John Deere 2010 Crawler Dozer
John Deere 420, 430, 435 & 440 Wheel Tractors
Who is online
Users browsing this forum: No registered users and 88 guests