Changing out drive sprockets
-
- 430 crawler
- Posts: 57
- Joined: Tue Dec 20, 2011 1:58 pm
- Location: nw mn
Changing out drive sprockets
Just got my new drive sprockets for 1966 350 straight and was wondering if u guys would suggest any other maintanence while changing out sprockets. Thanks
I'd check to see if the bearings in the final are good. I usually see if there is an excessive play in the shaft etc.
Change out the gear oil in the finals since you have it half apart.
I usually power wash everything before I work on it as well. That will help you see any loose bolts, or see if anything is broken.
Good luck.
Change out the gear oil in the finals since you have it half apart.
I usually power wash everything before I work on it as well. That will help you see any loose bolts, or see if anything is broken.
Good luck.
440 ICD 64 blade & 8a gear attic winch
440 ICD 831 loader with scarifier and weights
420 62 blade 3pt
Looking for 24 scarifier and 440 log arch
440 ICD 831 loader with scarifier and weights
420 62 blade 3pt
Looking for 24 scarifier and 440 log arch
Who is online
Users browsing this forum: No registered users and 173 guests