350 reverser oil pump gap/clearance
-
- 440 crawler
- Posts: 149
- Joined: Tue Sep 02, 2014 4:30 pm
- Location: new york..upstate..
350 reverser oil pump gap/clearance
Looking for the clearance for the reverser pump...mine is at .010, read the tech. manual and that spec. is not listed, all it says is to check for damage and replace as necessary. Don't wanna replace it if it's fine. Reverser seems to operate great, I can load it to a stall in 1st gear with no evidence of slippage.....thanks for any input.
Who is online
Users browsing this forum: No registered users and 104 guests