Wear Strip on 350B Front Idler track frame

Post support questions about your JD350 and newer crawler here
Post Reply
User avatar
cjman1977
420 crawler
420 crawler
Posts: 28
Joined: Fri Jun 13, 2014 1:48 pm
Location: Youngsville, NC
Contact:
Contact cjman1977

Wear Strip on 350B Front Idler track frame

Post by cjman1977 » Sat Jan 17, 2015 3:04 pm

Does anyone know the dimensions of the WELD ON wear strip on the under side of the C channel track frame where the front idler slides? Also, is it AR plate or a medium to high carbon steel?
Mine is so thin it only has one side. :lol:

Bennett
JD 350B w/ 4 in1
JD 4520 Compact Utility
JD 1025R Sub Compact
Cat 303.5 Mini Ex with Bushmaster Brush Cutter
Soilmover Dirt Pan
Top
Toofarnorth
MC crawler
MC crawler
Posts: 9
Joined: Mon Apr 06, 2015 4:10 pm
Location: Maine "The county"

Wear strip

Post by Toofarnorth » Mon May 11, 2015 12:31 pm

I would like to know this as well...


Edit:

So after no guidance on this I sheared out some strips of ar400. I hope I went the right direction with that...
Top
Post Reply

Return to “Late model JD crawler technical support”

Who is online

Users browsing this forum: No registered users and 143 guests