What is a jd 350b engine worth

Jrjenner · Post by **Jrjenner** » Sat Jan 17, 2015 8:11 pm

just trying to get a value of a running 350b engine. I currently don't need but would not mind having a backup. The owner states that the engine runs but burns a little oil. Any thoughts would be appreciated.

DrLoch · Post by **DrLoch** » Sun Jan 18, 2015 7:56 am

Forgive my ignorance with regards to the 350 series, is this is his gas or diesel? or does the 350B series only use one type of motor?

Jrjenner · Post by **Jrjenner** » Sun Jan 18, 2015 8:52 am

3 cylinder diesel

Stan Disbrow · Post by **Stan Disbrow** » Sun Jan 18, 2015 12:16 pm

Hi,

The straight 350 came in both gas and diesel. About the time of the B series, gas had gone away. So, I don't think any B series were made gas.

Not that this helps the OP, as I don't know what either one might be worth these days....

Stan

lurch85 · Post by **lurch85** » Sun Jan 18, 2015 4:29 pm

a bit of a tangent... but any thoughts to gas vs diesel as far as power? I know the diesel is harder starting and usually longer lasting. I have a 350 straight and food for thought.... if I find a decent diesel engine for a good price, how hard would the conversion be? (assuming lift pump and secondary were included of course)

MarkW · Post by **MarkW** » Fri Jan 23, 2015 9:57 am

lurch85 wrote:a bit of a tangent... but any thoughts to gas vs diesel as far as power? I know the diesel is harder starting and usually longer lasting. I have a 350 straight and food for thought.... if I find a decent diesel engine for a good price, how hard would the conversion be? (assuming lift pump and secondary were included of course)

I don't know about the conversion, but my hunch would be that it is harder to swap the engine than it would be to clean, detail, and sell your dozer and purchase a comparable diesel model. Probably be a bit cheaper too.

JDcrawlers Messageboard

What is a jd 350b engine worth

What is a jd 350b engine worth

Who is online