General help and support for your Lindeman through 2010 John Deere crawler
-
dmlinton
- 40C crawler
![40C crawler 40C crawler](./images/ranks/wrench/spanner_rank_0.gif)
- Posts: 22
- Joined: Sun Jan 13, 2008 2:39 pm
- Location: Madoc, Ontario, Canada
Post
by dmlinton » Fri Jan 18, 2008 1:43 pm
Greetings!
Is that a No. 61 dozer in the picture below? It is off of my JD 40C.
It is pretty beat up and there are pieces missing to boot. I intend to rebuild it more or less to original specs so if anyone has detailed pictures of a compete dozer, I would be grateful if you could share them. There do not seem be many detailed pictures of these old crawler equipment floating about the Internet.
Thanks,
Dennis
Dennis
1955 40C, 1957 420C, 1960 440IC, 1952 MTW, 1950 M, 1960 Mack B-30
-
Lavoy
- Site Admin
![Site Admin Site Admin](./images/ranks/wrench/spanner_rank_5_admin.gif)
- Posts: 10957
- Joined: Sun Apr 03, 2005 8:32 pm
- Location: North Dakota
-
Contact:
Post
by Lavoy » Fri Jan 18, 2008 7:15 pm
Yes it is. You can order a parts manual from Deere, or you will sometimes find them on E-bay. I believe there is a manual on there right now.
Lavoy
-
Jimmy in NC
- 440 crawler
![440 crawler 440 crawler](./images/ranks/wrench/spanner_rank_2.gif)
- Posts: 164
- Joined: Fri Apr 22, 2005 10:44 pm
- Location: Raleigh - NC
Post
by Jimmy in NC » Sat Jan 19, 2008 9:19 am
I've got printed off versions of the parts manual from my local JD dealer and would be glad to scan and e-mail them to you. Just PM me your e-mail and I'll get it done on Monday.
They are hard to read hence I'll put them in PDF so there is little distortion. They are readable though and have really helped with my 61.
Jimmy in NC
1957 420C 4 roller 4 spd #61 blade 107,xxx ser.
Hand clutches, not for everyone.
Steering clutches, for even less.
Who is online
Users browsing this forum: No registered users and 91 guests