10/10 reverser
-
- 40C crawler
- Posts: 20
- Joined: Thu Apr 21, 2005 3:12 am
10/10 reverser
hi all
i'm have trouble with my reverser it wants to go both ways at the same time.. i'm looking for info manuals etc..thanks Al
ps thanks Lavoy for redirecting me here...
i'm have trouble with my reverser it wants to go both ways at the same time.. i'm looking for info manuals etc..thanks Al
ps thanks Lavoy for redirecting me here...
-
- 40C crawler
- Posts: 20
- Joined: Thu Apr 21, 2005 3:12 am
ser no
Someone correct me if I'm wrong but I think look on the bell housing behind the engine, LHS. I have a wreck that has the plate in front of the engine, RHS
If you get stuck, I alos have an extra parts manual for 1010C too, will sell, cheap but good and nice.
bent
If you get stuck, I alos have an extra parts manual for 1010C too, will sell, cheap but good and nice.
bent
-
- 40C crawler
- Posts: 20
- Joined: Thu Apr 21, 2005 3:12 am
-
- 40C crawler
- Posts: 20
- Joined: Thu Apr 21, 2005 3:12 am
-
- 40C crawler
- Posts: 20
- Joined: Thu Apr 21, 2005 3:12 am
-
- 40C crawler
- Posts: 20
- Joined: Thu Apr 21, 2005 3:12 am
ser no
Al, that's not a serial number, that's a part number, probably of the reverser case. I don't have a book here so I don't know, I just know your serial number will be up around 20,000 plus if the shifter is on the floor. Your serial number, if it still exists on the machine, will be on a plate riveted to something and should say 1010 first.
I can send you some pics.
bent
I can send you some pics.
bent
-
- 40C crawler
- Posts: 20
- Joined: Thu Apr 21, 2005 3:12 am
serial number
Al, that sounds right, the shifter moved to the floor at 21,901. I have an op man that will work, cover is missing and some of the pages are ripped but overall, not too bad. It is the worng one for my crawler. The parts man is near perfect. I don't have a service manual but they are available. If you want them, send me an email with your address.
bent
bent
Who is online
Users browsing this forum: No registered users and 130 guests