axle movement

General help and support for your Lindeman through 2010 John Deere crawler
Post Reply
User avatar
Eric.MacLeod
440 crawler
440 crawler
Posts: 120
Joined: Sun Feb 10, 2008 9:15 pm
Location: wells,maine

axle movement

Post by Eric.MacLeod » Sat Dec 27, 2008 8:56 pm

sorry for so many questions! when i pulled the sprocket off my 420 dozer i found out that the axle can be moved in and out freely, it is not alot but when i move it in the axle can be lifted a little, when i pull it out it thightens up, is the bearings worn or do i need to shim it up a little? thank you.. Eric
Top
User avatar
Lavoy
Site Admin
Site Admin
Posts: 11116
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:
Contact Lavoy

Post by Lavoy » Mon Dec 29, 2008 9:52 am

Pull the inner axle cover and make sure the retainer is still tight. If that is OK, you may be able to shim the bearings in to remove the play.
Lavoy
Top
User avatar
Eric.MacLeod
440 crawler
440 crawler
Posts: 120
Joined: Sun Feb 10, 2008 9:15 pm
Location: wells,maine

Post by Eric.MacLeod » Mon Dec 29, 2008 2:47 pm

thank you i will go out and give it a try. thanks ...Eric
Top
Post Reply

Return to “Early model JD crawler technical support”

Who is online

Users browsing this forum: No registered users and 60 guests