440icd

General help and support for your Lindeman through 2010 John Deere crawler
Post Reply
User avatar
switchhappy
440 crawler
440 crawler
Posts: 137
Joined: Fri Jan 26, 2007 7:24 pm
Location: bonnieville, ky

440icd

Post by switchhappy » Mon Mar 09, 2009 3:23 pm

iv seen on here that a few people may have the detroit manaul for the 2-53... im needing to know how the blower is brokedown and all the specks on the blower...exc... can someone give me a copy of the pages with the blower on it.. thanks in advance
350c 6 way blade, winch, log arch,,, current 3 year project of being saved and put backgether.. HELP

User avatar
switchhappy
440 crawler
440 crawler
Posts: 137
Joined: Fri Jan 26, 2007 7:24 pm
Location: bonnieville, ky

Post by switchhappy » Mon Mar 09, 2009 8:58 pm

ok i got the blower off.. good loard do u gotta take a lot of stuff off.. i took off the water neck and the water pump.. thats a job.. but i got it off and there is timeing marks on it.. looks like someone has been into it befor... been a wile but has been there.. blower and passage was covered with oil.. oil was dripping out of the blower and as i turnd it by hand it was spitting oil at me.. so id say the seals are gone.. i have got the seal kit and the install kit,, i just need to know what all the specks are on the blower.. like shims and what not.. if someone could help id be gradfull... thank u
350c 6 way blade, winch, log arch,,, current 3 year project of being saved and put backgether.. HELP

User avatar
switchhappy
440 crawler
440 crawler
Posts: 137
Joined: Fri Jan 26, 2007 7:24 pm
Location: bonnieville, ky

Post by switchhappy » Tue Mar 10, 2009 7:26 pm

man cant someone help me out here... :cry:
350c 6 way blade, winch, log arch,,, current 3 year project of being saved and put backgether.. HELP

User avatar
Lavoy
Site Admin
Site Admin
Posts: 11116
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:

Post by Lavoy » Tue Mar 10, 2009 10:47 pm

Just saw this post. Brad Kahler is the one that has the manuals on CD. Search through the posts, you should find one of his posts about the manuals, and you will be able to contact him that way.
Lavoy

Post Reply

Who is online

Users browsing this forum: No registered users and 8 guests