1010 oil leaking on brakeband,??????????????????????

General help and support for your Lindeman through 2010 John Deere crawler
Post Reply
spenceraucoin
420 crawler
420 crawler
Posts: 41
Joined: Fri Oct 17, 2008 6:36 am
Location: Amelia, La

1010 oil leaking on brakeband,??????????????????????

Post by spenceraucoin » Thu Apr 30, 2009 4:15 pm

Need some advice i have aoil leaking on the brake band is there a kwick fix i can do, or do i need to put new seals in ????????????????????????? 1010 dozer,,,,,,

User avatar
Lavoy
Site Admin
Site Admin
Posts: 11116
Joined: Sun Apr 03, 2005 8:32 pm
Location: North Dakota
Contact:

Post by Lavoy » Thu Apr 30, 2009 4:37 pm

Unfortunately not, start looking for leaking seals.
Lavoy

jdemaris

Re: 1010 oil leaking on brakeband,??????????????????????

Post by jdemaris » Fri May 01, 2009 8:03 am

spenceraucoin wrote:Need some advice i have aoil leaking on the brake band is there a kwick fix i can do, or do i need to put new seals in ????????????????????????? 1010 dozer,,,,,,
Seals are often not the true problem. Usually it's loose shafts or loose ring-gear carriers that by shucking back and forth, takes out the seals.
Just plain old bearing wear over the years.

No quick fix that I know of. Pull it apart and check all bearing adjustments. Them shim all to get proper preload and eliminate movement, install new seals, and that ought to do it.
Just be careful when taking shims out of the ring-gear carrier. You can only remove from one side or you'll screw up the pinion-to-ring adjustment.

Post Reply

Who is online

Users browsing this forum: No registered users and 23 guests