Hello, and a pic of my 2010 loader with case hoe
-
- 430 crawler
- Posts: 57
- Joined: Thu Dec 10, 2009 2:58 pm
- Location: www.homegunsmith.com
Hello, and a pic of my 2010 loader with case hoe
You guys kept popping up in my searches on track loaders. Lots of good info here, and I've got a lot of learning to do, so I signed up
Here is a pic of my 2010 I just got. It has a case hoe on the back. The Crawler runs, but needs a rebuild according to the previous owner, the bucket and hydraulics work perfect and I think the undercarrriage looks pretty good in my limited experiance, from what I've read. the hoe needs a little TLC, it has a bent pin and droops. I've heard that new O-rings or rebuild of the valve body should fix this. Any ways, I'm jazzed and wanted to say thanks for the info so far.
[/img]
Here is a pic of my 2010 I just got. It has a case hoe on the back. The Crawler runs, but needs a rebuild according to the previous owner, the bucket and hydraulics work perfect and I think the undercarrriage looks pretty good in my limited experiance, from what I've read. the hoe needs a little TLC, it has a bent pin and droops. I've heard that new O-rings or rebuild of the valve body should fix this. Any ways, I'm jazzed and wanted to say thanks for the info so far.
[/img]
-
- 430 crawler
- Posts: 57
- Joined: Thu Dec 10, 2009 2:58 pm
- Location: www.homegunsmith.com
- JD440ICD2006
- 350 crawler
- Posts: 1113
- Joined: Tue Aug 22, 2006 3:57 pm
- Location: South Carolina
Nice machine, there is not much you cannot get done with that one.
Welcome to the board!
Welcome to the board!
1959 JD 440ICD w/64 Power Angle Tilt Blade
1959 JD 440ICD w/63 Manual Angle Blade
1959 JD 440IC w/602 Manual Angle Blade
1959 JD 730D W SE (many options)
1950 JD M S w/M-20 Mower
1952 JD M W
1955 FORD 640 (burns the most fuel)
1959 JD 440ICD w/63 Manual Angle Blade
1959 JD 440IC w/602 Manual Angle Blade
1959 JD 730D W SE (many options)
1950 JD M S w/M-20 Mower
1952 JD M W
1955 FORD 640 (burns the most fuel)
Do you know what model of Case Hoe that is? It looks quite similar to the model 33 hoe on my Case 580CK. Just wondering.
Bryce
Bryce
No trees were hurt in the creation of this message.
But, many electrons were terribly bothered.
440IC/602, 2-440ICD/831 MM UBU-LP, 445N-LP, 445E-LP, BIG MO 400-M, 4 Star-LP M5-D, M5-LP, M602-LP, M670-LP, G900-LP, G900-D, G1000 Vista-LP Case 580CK
But, many electrons were terribly bothered.
440IC/602, 2-440ICD/831 MM UBU-LP, 445N-LP, 445E-LP, BIG MO 400-M, 4 Star-LP M5-D, M5-LP, M602-LP, M670-LP, G900-LP, G900-D, G1000 Vista-LP Case 580CK
-
- 430 crawler
- Posts: 57
- Joined: Thu Dec 10, 2009 2:58 pm
- Location: www.homegunsmith.com
MadJack
Mine has the serial number plate rivited to the side of the control console that is visable in the picture about a foot down from the top. That is the only S/N I can find on the whole TLB, I can only find holes or rivets where they belong on the tractor, engine and loader. It has been painted over but I can read model 33 and the S/N under the paint. If I can convince my camera to work with this computer again maybe I can take some detail picures to compare.
Bryce
Mine has the serial number plate rivited to the side of the control console that is visable in the picture about a foot down from the top. That is the only S/N I can find on the whole TLB, I can only find holes or rivets where they belong on the tractor, engine and loader. It has been painted over but I can read model 33 and the S/N under the paint. If I can convince my camera to work with this computer again maybe I can take some detail picures to compare.
Bryce
No trees were hurt in the creation of this message.
But, many electrons were terribly bothered.
440IC/602, 2-440ICD/831 MM UBU-LP, 445N-LP, 445E-LP, BIG MO 400-M, 4 Star-LP M5-D, M5-LP, M602-LP, M670-LP, G900-LP, G900-D, G1000 Vista-LP Case 580CK
But, many electrons were terribly bothered.
440IC/602, 2-440ICD/831 MM UBU-LP, 445N-LP, 445E-LP, BIG MO 400-M, 4 Star-LP M5-D, M5-LP, M602-LP, M670-LP, G900-LP, G900-D, G1000 Vista-LP Case 580CK
-
- 430 crawler
- Posts: 57
- Joined: Thu Dec 10, 2009 2:58 pm
- Location: www.homegunsmith.com
-
- 430 crawler
- Posts: 57
- Joined: Thu Dec 10, 2009 2:58 pm
- Location: www.homegunsmith.com
-
- 430 crawler
- Posts: 57
- Joined: Thu Dec 10, 2009 2:58 pm
- Location: www.homegunsmith.com
- jdjoe_indiana
- 420 crawler
- Posts: 36
- Joined: Sat Aug 05, 2006 8:55 pm
- Location: Helmer, Indiana
Who is online
Users browsing this forum: No registered users and 71 guests